Main Menu

How Does An Indoor Unheated Emergency Safety Shower Operate?

An indoor unheated emergency shower is required precautionary equipment that should be available in all places, where accidents occur a lot. Accidents can include spraying, splashing, or spilling of acids, caustics, or other hazardous corrosive substances in laboratories, factories, etc. In case of a fire or an explosion, specifically in the presence of inflammable liquids, the indoor unheated emergency safety shower can be of great use.

On occurring of an emergency, it is essential to wash that place with water for at least 15-20 minutes to remove all stains of chemicals. An individual, exposed to such an accident, should be rushed to the hospital, after an emergency shower has been used to wash his affected body parts.

The placement of emergency showers is of critical importance, since they should be located within reach. One should be able to get a hold of it within ten seconds, and it should not be located more than 50 feet away from the work area. The quality of the equipment should be of the best standard; otherwise it may cause further harm instead of doing well. In order to maximise its effectiveness, it is equally important to install it, and maintain it properly.

Installation of emergency showers must comply with some basic rules. Firstly, the showerheads have to be located between 82-96 inches from the surface where the person will be present. Secondly, at least 30 gallons of water should be delivered per minute at an appropriate velocity. Thirdly, the control valves must stay open while the operation is taking place. Fourthly, it should take seconds to switch the control valves from on to off positions.

The indoor emergency showers are designed in such a way that in times of emergency, one should be able to use it quickly, without losing a single second. These are mostly made for self-use. One can operate an emergency shower without even using his/her hands. The shower can start functioning with a simple pull of a lever or handle. It may also be operated with the help of paddlers. To turn it off, one should follow the opposite directions of turning it on. Almost all emergency showers employ the use of potable water.

Two sorts of emergency showers are attainable in the market, manual, and automatic. Both should not be hard to operate. Automatic emergency showers are based on touch system. All indoor unheated emergency showers are manufactured on the standards governed by USA, Germany, or India.

Although an unheated safety shower is advantageous in case of an unfortunate accident, it may cause complications during winters. The lines and valves may break due to the freezing water.

It would also become impossible for the workers to use extremely cold water during the first fifteen minutes of the water flow. This hampers the effectiveness of a safety shower. To overcome this problem, it is imperative that one uses anti-freezing agent in the unheated indoor safety showers in colder climates.

About the Author

ouise Jones is a safety consultant. You can buy variety of Safety showers and Emergency eyewash at his recommended site at http://www.maestrose.com.

You can publish this article "How Does An Indoor Unheated Emergency Safety Shower Operate?" on your website as long as you include a link back to http://www.articlesfinder.com

View PDF | Print View
by: Louis Jones Total views: 1 Word Count: 503
Date: Tue, 10 Nov 2009 Time: 10:04 AM 0 comments